MA1610T 16X10 3-BLADE PROP

 This is Master Airscrew's injection-molded Fiberglass-Filled 16x10 3-Blade   
   Nylon Propellor. This is suitable for any application from training and     
    sport flying to serious competition.                                       
                                                                               
FEATURES: Factory-balanced 3-blade prop has NACA airfoils and holds true pitch.
          They have been accurately balanced and create a greater thrust       
            at lower RPM.                                                      
          Prop is glass-filled nylon as opposed to a wooden prop.              
                                                                               
INCLUDES: One 16x10 Glass-Filled Nylon 3-Bladed Propeller.                     
                                                                               
SPECS:    Diameter: 16"                                                        
          Pitch:  10"                                                          
                                                                               
COMMENTS: The general rule for converting a 2 blade prop to a 3 blade is       
            subtract 1" from Diameter OR subtract 1 from the Pitch.            
                                                                   baw 01/03/02
                                                                          ir/kh
PER MASTER AIRSCREW: All 3- and 4- blades props are balanced dynamically at the
 factory prior to drilling. The mounting holes are then drilled slightly off   
center, if required, to properly balance the propeller. As such, your mounting 
hole may be slightly off center. Master Airscrew assures us this is perfectly  
normal and will not cause any problems during usage.